rulesvova.blogg.se - Rowenta pro master steam iron dw8080

ROWENTA PRO MASTER STEAM IRON DW8080 HOW TO
ROWENTA PRO MASTER STEAM IRON DW8080 ZIP

Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean.Īt the end of the operation, push the anti-calc valve back into position. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Unplug the iron then hold your iron horizontally above the sink. Place the iron on its heel and leave to heat up for around 5 minutes. Set the thermostat control to Max and the steam control on DRY and switch on. Maintenance and cleaning How do I prevent the steam holes of my iron from clogging up?įirstly, fill the iron tank to MAX with water. Leave the iron to cool down before putting it away and follow these 4 tips:Įmpty out the water remaining in the tank, set the thermostat to minimum, switch off the steam control and stand it upright or put it back in its base (depending on the model). Can I put my iron away right after ironing? We recommend that you start with fabrics to be ironed at a low temperature. Important: The iron takes longer to cool down than to heat up.

If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre. We would advise ironing dark clothes inside out and using the correct temperature. Shiny marks can appear on some fabrics, especially on dark coloured fabrics. Never clean your iron's soleplate with abrasive or metallic pads.

ROWENTA PRO MASTER STEAM IRON DW8080 ZIP

Avoid ironing over abrasive items (buttons, zip fastenings, etc.).

Always place your iron on its heel rest or its base (depending on model).

To avoid damaging the soleplate, follow this advice: How can I avoid scratching the soleplate of my iron? No, you must always unplug the iron before filling it. Can I fill the iron with water when it is plugged in?

If it has not been used for a long time (for example several weeks), use it over the sink for a few minutes to remove any residue that could stain your laundry. What should I do if my iron has not been used for a long time? ).Īt the end of your ironing session, we would suggest that once your iron has cooled down, you should wipe over the soleplate and around the steam holes to remove any burned fibers that may have started collecting around the steam holes.Set the variable steam control to Dry and set the temperature to suit the type of material (care points Yes and you do not need to fill the tank with water. Note: Never use the vertical steam function on an item being worn by anyone. Press the steam control button intermittently and move the iron from top to bottom.Īs the steam produced is very hot, it softens the fibres and removes creases.Leave the item on a hanger and gently pull the fabric with one hand.To do this, set the iron temperature button to the maximum position. This function allows you to iron fabrics in situ or on a hanger. What is the vertical steam function used for? How do I use it? Use steam only when the iron is hot (the light must be off).The temperature button must be placed on Steam area (between 2 dots and MAX).Don't use the Boost steam button intensively.How do I prevent water drips on my fabrics? Marker with 3 dots for cotton and linen.Marker with 1 dot for synthetic fabrics.Make sure that you use the right temperature for your clothes:

The thermostat dial contains international markers with dots corresponding to three ironing temperatures. Your iron has a built-in thermostat controlling the temperature very precisely over the entire surface of the soleplate. It is essential to select the right ironing temperature. What is the right temperature for my clothes?

See the instructions for use to find out what type of water is appropriate and clean the soleplate from time to time with a damp sponge.

The clothes have not been rinsed enough and there is detergent left on them or you have ironed a new item of clothing before washing it.

Fibers from clothes have been trapped in the holes in the iron and have become carbonised.

You have used a starch type product on your laundry (Always spray to the reverse side of the fabric to be ironed and clean your iron afterwards).

You are not using the right type of water (Refer to the FAQ "What water should I use for ironing?").

The soleplate of my iron is giving off a yellowish colour that is staining my clothes. The ironing board cover should also be suitable to allow the flow of steam through. The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier. It should be steady and robust so that you can place the ironing appliance on it.

ROWENTA PRO MASTER STEAM IRON DW8080 HOW TO

How to better use my product What type of ironing board should I use?Ĭhoose a board that is height-adjustable to adjust it to your height. Find more detailed information in the Warranty section of the website.